Prefabricated inspection chambers from Marley Plumbing and Drainage & Hunter of UK
Prefabricated inspection chambers may be used as an alternative to traditionally constructed manholes for invert depths of up to 1.2 meters. Intermediate depths can easily be accommodated by simply cutting a riser, between the ribbed sections, to the desired height using a fine tooth saw. The chambers incorporate a push fit jointing system between components using ring seals fitted around the risers to enable water testing to be carried out.
Chambers should be installed on a 100mm bed of suitable as-dug or granular material and care should be taken to ensure the bedding material is evenly compacted under the base so that the chamber is fully supported. During the installation stage and prior to backfilling, it is recommended that chamber riser retaining clips UCC10 are fitted to maintain vertical alignment of the chamber during the backfilling operation. The riser can be trimmed to suit the finished ground level and the cover and frame fitted to prevent debris from entering the drain. Side fill material should extend to just below ground level and the cast iron cover and frame set in a concrete plinth.
Two version of Ø450mm chamber base are available, the UCC3 has Ø110mm inlets and outlet and the UCC5 has Ø110/160mm inlets and 160mm outlet. Both have ring seal socket connections.
When connecting the UCC3 or UCC5 chamber base to a riser, the ring seal must be inserted in the first groove of the riser, as detailed opposite. When jointing riser to riser, the ring seal is always located in the first groove and to ease jointing it is recommended that silicone lubricant is used.
Inspection chambers UCC3 and UCC5 are designed to withstand water testing in accordance with BS EN 1610. Chambers may be filled to ground level (1.2 meters max) in isolation or part of a pipeline or complete drainage installation.
Due to the non-absorbent nature of plastic materials the one hour conditioning period is not necessary prior to carrying out water test.
THE 450mm INSPECTION CHAMBER CONSISTS OF THREE PARTS:
1. Chamber base
2. Chamber riser
3. Chamber cover and frame
1. Chamber Base
a) UCC3 – Black Polypropylene with Ø110mm all socketed connections. Meets the requirements of EN 7158: 2001. Maximum invert depth 1200mm.
b) UCC5 – Black Polypropylene with Ø110/160mm inlets and 160mm outlet. Meets the requirements of EN: 7158: 2001. Maximum invert depth 1200mm.
2. Chamber Riser
UCR2-For use with chamber bases UCC3 and UCC5. Height 390mm. Push fit ring seal joint into chamber base. Supplied with a ring seal (SR450) packaged separately.
3. Chamber Cover and Frame
a) UCL35PP Ø450mm Polypropylene to EN 124: 1994 Class A15 – meets 35KN test loads suitable for domestic driveway applications.
b) UCL35 Ø450mm Cast Iron to EN 124: 1994 Class A15 – meets 35KN test loads suitable for domestic driveway applications.
c) UCL125 Ø450mm Ductile cast Iron to EN124: 1994 Class B125
d) DS065 Hunter Recessed Square to Round Access cover 580x580mm. 5 Tonnes wheel load suits pedestrian areas/ domestic driveways. (accepts paviors)
e) DS076 Hunter 530x530mm Square cover and frame. Durable Polypropylene 35KN wheel load suits pedestrian/domestic driveways.
250 INSPECTION CHAMBER
The UCC7 Ø250mm inspection chamber may be used as an alternative to traditional manholes for invert depths up to 600mm. Intermediate depths can be accommodated by cutting the chamber riser using a hard tripped handsaw or similar. The UCC7 has sockets on both Ø110mm outlet and inlets and requires no cutting as direct connection can be made to the ring seal sockets.
Square, circular and recessed plastic lids and frames are available for use with the inspection chamber and meet the loading requirements of BS EN 124: 1994 Class A15.
COVERS AND FRAMES
a) UCL2 Black uPVC Round chamber lid and frame. Loading requirements of EN124: 1994 Class A15.
b) UCL3 Black uPVC Square lid and frame. Loading requirements of EN124: 1994 Class A15.
c) DS075 Hunter Black uPVC Square recessed lid and frame 390x390mm. 35KN wheel load suits pedestrian areas/domestic driveways. (accepts Paviors)
Links
www.hunterplastics.co.uk
www.marleyplumbinganddrainage.com
www.hunterplastics.co.uk
www.marleyplumbinganddrainage.com
Pdf donwload files
Prefabricated inspection chambers catalogue1
Prefabricated inspection chambers catalogue2













